Select Your Vehicle
Choose a Year for your vehicle
Drive Shaft
Showing 1 – 10 products of 29 products
FSGR - Drive Shaft - Rear Spicer
FSGR - Rear
Drive Shaft
3.50in Tube Diameter with Performance Driveshaft
- Cl Yoke To Cl Yoke(IN) - COLL.: 51.2205
- Cl Yoke To Cl Yoke(MM) - COLL.: 1301.0000
- Phased - Degrees: N
- Slip (In): 0.7874
- Slip (Mm): 20.0000
Vehicle | Submodel | Position |
---|---|---|
2005 Ford Mustang | GT | Rear |
2006 Ford Mustang | GT | Rear |
2007 Ford Mustang | GT | Rear |
2008 Ford Mustang | GT | Rear |
2009 Ford Mustang | GT | Rear |
2010 Ford Mustang | GT | Rear |
Driveshaft / Prop Shaft - Drive Shaft - Rear Cardone
Driveshaft / Prop Shaft - Rear
with 3.55 Axle Ratio with 32-5/8" (828 mm) Long Driveshaft Measurement taken from end of flange face to end of flange face
- Drive Shaft Material: Steel
- E-Waste: No
- Features and Benefits:
- 100% New Universal Joints Are Installed To Ensure Proper Fit And Optimal Performance.
- All Slip Yokes Are Lubricated To Prevent Premature Wear.
- Built To Match O.e. Form, Fit And Function.
- Units Are 100% Dynamically Balanced At 3200 Rpms For Vibration-free Operation And Increased Joint Life.
- Greasable: No
- Length (mm): 828
- Measurement Method: Measurement Is Taken From End Of Input Shaft To Center Of U-joint
- Product Condition: New
- Tubing Outer Diameter (in): 2.5
- Tubing Outer Diameter (mm): 63.5
Vehicle | Transmission | Trans. Speed | Drive Type | Transmission Manuf. Code | Position | Block | Engine | CID | CC |
---|---|---|---|---|---|---|---|---|---|
1996 Ford Bronco | Automatic | 4 | 4WD | Rear | V | 8 Cyl 5.0L | 302 | - | |
1994 Ford Bronco | Automatic | 4WD | C6 | Rear | V | 8 Cyl 5.0L | 302 | - | |
1992 Ford Bronco | Automatic | 4WD | C6 | Rear | V | 8 Cyl 5.0L | 302 | - | |
1990 Ford Bronco | Automatic | 4WD | C6 | Rear | V | 8 Cyl 5.0L | 302 | - | |
1992 Ford Bronco | Manual | 4 | 4WD | Rear | V | 8 Cyl 5.0L | 302 | - | |
1991 Ford Bronco | Manual | 4 | 4WD | Rear | V | 8 Cyl 5.0L | 302 | - | |
1990 Ford Bronco | Manual | 4 | 4WD | Rear | V | 8 Cyl 5.0L | 302 | - | |
1991 Ford Bronco | Automatic | 4WD | C6 | Rear | L | 6 Cyl 4.9L | 300 | 4917 | |
1990 Ford Bronco | Automatic | 4WD | C6 | Rear | L | 6 Cyl 4.9L | 300 | 4917 | |
1994 Ford Bronco | Manual | 5 | 4WD | Rear | V | 8 Cyl 5.0L | 302 | - | |
1993 Ford Bronco | Manual | 5 | 4WD | Rear | V | 8 Cyl 5.0L | 302 | - |
CV Style Drive Shaft - Drive Shaft - Front Rubicon Express
CV Style Drive Shaft - Front
RE1810 Adapter Required For Installation~Sold Separately
CV Style Drive Shaft; Front;
- Horsepower Rating: Oem
- Material: Steel
- Position: Front
- Usage: Oem
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Compatible With RE1811 Slip Yoke Eliminator Kit
- Compatible With Atlas Transfer Cases
- Compatible With Any 1310 Series CV Yoke
- Measured Center To Center On Joint
- Measured With Slip Stub At Center Of Travel
- Measure w/Vehicle On Ground In Running Position
Vehicle | Submodel | Transmission | Position |
---|---|---|---|
2010 Jeep Wrangler | Unlimited Sport | Front | |
2011 Jeep Wrangler | Sport | Front | |
2011 Jeep Wrangler | Unlimited Rubicon | Front | |
2011 Jeep Wrangler | Unlimited Sahara | Front | |
2011 Jeep Wrangler | Unlimited Sport | Front | |
2016 Jeep Wrangler | Rubicon | Automatic | Front |
2016 Jeep Wrangler | Unlimited Rubicon | Automatic | Front |
2016 Jeep Wrangler | Unlimited Sport | Automatic | Front |
2017 Jeep Wrangler | Sport | Front | |
2017 Jeep Wrangler | Sahara | Front | |
2017 Jeep Wrangler | Rubicon | Front |
CV Style Drive Shaft - Drive Shaft - Front Rubicon Express
CV Style Drive Shaft - Front
36.50 in. Long RE1810 Adapter Required For Installation~Sold Separately
CV Style Drive Shaft; Front; 36.50 in. Long;
- Horsepower Rating: Oem
- Material: Steel
- Position: Front
- Usage: Oem
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Compatible With RE1811 Slip Yoke Eliminator Kit
- Compatible With Atlas Transfer Cases
- Compatible With Any 1310 Series CV Yoke
- Measured Center To Center On Joint
- Measured With Slip Stub At Center Of Travel
- Measure w/Vehicle On Ground In Running Position
Vehicle | Submodel | Transmission | Position |
---|---|---|---|
2010 Jeep Wrangler | X | Front | |
2015 Jeep Wrangler | Sahara | Manual | Front |
2015 Jeep Wrangler | Unlimited Rubicon | Manual | Front |
2015 Jeep Wrangler | Unlimited Sahara | Manual | Front |
2015 Jeep Wrangler | Unlimited Sport | Manual | Front |
2016 Jeep Wrangler | Sport | Manual | Front |
2016 Jeep Wrangler | Sahara | Manual | Front |
2016 Jeep Wrangler | 75th Anniversary | Manual | Front |
2016 Jeep Wrangler | Unlimited 75th Anniversary | Manual | Front |
2017 Jeep Wrangler | Sport | Manual | Front |
Vehicle | Submodel | Transmission | Position |
---|---|---|---|
2019 Jeep Wrangler | Unlimited Rubicon | Manual | Front |
Driveshaft / Prop Shaft - Drive Shaft - Rear Cardone
Driveshaft / Prop Shaft - Rear
with 48" (1220 mm) Long Driveshaft Supplied as New Measurement taken from end of input shaft to center of U-Joint
- Drive Shaft Material: Steel
- E-Waste: No
- Features and Benefits:
- 100% New Universal Joints Are Installed To Ensure Proper Fit And Optimal Performance.
- All Slip Yokes Are Lubricated To Prevent Premature Wear.
- Built To Match O.e. Form, Fit And Function.
- Units Are 100% Dynamically Balanced At 3200 Rpms For Vibration-free Operation And Increased Joint Life.
- Greasable: No
- Length (mm): 1220
- Measurement Method: Measurement Is Taken From End Of Input Shaft To Center Of U-joint
- Product Condition: New
- Tubing Outer Diameter (in): 2.76
- Tubing Outer Diameter (mm): 70
Vehicle | Body | Drive Type | Position |
---|---|---|---|
2012 Chevrolet Colorado | Standard Cab Pickup | 4WD | Rear |
2011 Chevrolet Colorado | Standard Cab Pickup | 4WD | Rear |
2010 Chevrolet Colorado | Standard Cab Pickup | 4WD | Rear |
2009 Chevrolet Colorado | Standard Cab Pickup | 4WD | Rear |
2008 Chevrolet Colorado | Standard Cab Pickup | 4WD | Rear |
2007 Chevrolet Colorado | Standard Cab Pickup | 4WD | Rear |
2006 Chevrolet Colorado | Standard Cab Pickup | 4WD | Rear |
2009 GMC Canyon | Standard Cab Pickup | 4WD | Rear |
2008 GMC Canyon | Standard Cab Pickup | 4WD | Rear |
2007 GMC Canyon | Standard Cab Pickup | 4WD | Rear |
2004 GMC Canyon | Standard Cab Pickup | 4WD | Rear |
Drive Shaft - Drive Shaft - Front Fabtech
Drive Shaft - Front
Drive Shaft; Front;
- Horsepower Rating: Oem
- Material: Steel
- Position: Front
- Usage: Off-road
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Heavy Duty Replacement Driveshafts For Maximum
- Driveline Reliability
- Guarantee Superior Performance And Functionality
Vehicle | Submodel | Drive Type | Position | Block | Engine | CID | CC |
---|---|---|---|---|---|---|---|
2017 Ford F-250 Super Duty | Front | V | 8 Cyl 6.7L | 406 | 6651 | ||
2017 Ford F-350 Super Duty | Front | V | 8 Cyl 6.7L | 406 | 6651 | ||
2020 Ford F-250 Super Duty | Platinum | Front | V | 8 Cyl 6.7L | 406 | 6651 | |
2020 Ford F-250 Super Duty | XL | 4WD | Front | V | 8 Cyl 6.7L | 406 | 6651 |
2020 Ford F-350 Super Duty | Limited | Front | V | 8 Cyl 6.7L | 406 | 6651 | |
2020 Ford F-350 Super Duty | Platinum | 4WD | Front | V | 8 Cyl 6.7L | 406 | 6651 |
2020 Ford F-350 Super Duty | XL | 4WD | Front | V | 8 Cyl 6.7L | 406 | 6651 |
2021 Ford F-250 Super Duty | Limited | Front | V | 8 Cyl 6.7L | 406 | 6651 | |
2021 Ford F-250 Super Duty | Platinum | Front | V | 8 Cyl 6.7L | 406 | 6651 | |
2021 Ford F-250 Super Duty | King Ranch | 4WD | Front | V | 8 Cyl 6.7L | 406 | 6651 |
2021 Ford F-250 Super Duty | Lariat | 4WD | Front | V | 8 Cyl 6.7L | 406 | 6651 |
Drive Shaft - Drive Shaft - Rear Fabtech
Drive Shaft - Rear
Drive Shaft; Rear;
- Position: Rear
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Front And Rear Lower 5 Ton Link Arms
- Front Link Arm Crossmember And Skid Plate
- Rear Lower Link Arm Mounts
- Front And Rear Corner Specific Dual Rate Coil Springs
- Front And Rear Bump Stop Extensions
- Front And Rear Sway Bar Links
- Front And Rear Brake Line Drops
- Front And Rear Track Bar Bracket
- Heavy Duty Flipped Draglink
- Front Shock Mount Brackets
- Front And Rear Dirt Logic 2.25 Resi Shocks
Vehicle | Submodel | Position | Block | Engine | CID | CC |
---|---|---|---|---|---|---|
2018 Jeep Wrangler | Unlimited Rubicon | Rear | L | 4 Cyl 2.0L | 122 | 1997 |
2018 Jeep Wrangler | Unlimited Rubicon | Rear | V | 6 Cyl 3.6L | 220 | 3604 |
2018 Jeep Wrangler | Unlimited Sahara | Rear | L | 4 Cyl 2.0L | 122 | 1997 |
2018 Jeep Wrangler | Unlimited Sahara | Rear | V | 6 Cyl 3.6L | 220 | 3604 |
2019 Jeep Wrangler | Unlimited Rubicon | Rear | V | 6 Cyl 3.6L | 220 | 3604 |
2019 Jeep Wrangler | Unlimited Sport | Rear | L | 4 Cyl 2.0L | 122 | 1997 |
2019 Jeep Wrangler | Unlimited Sport | Rear | V | 6 Cyl 3.6L | 220 | 3604 |
2020 Jeep Wrangler | Unlimited Sahara | Rear | V | 6 Cyl 3.6L | 220 | 3604 |
2020 Jeep Wrangler | Unlimited Sahara | Rear | V | 6 Cyl 3.0L | 182 | 2987 |
2020 Jeep Wrangler | Unlimited Sport | Rear | L | 4 Cyl 2.0L | 122 | 1997 |
2020 Jeep Wrangler | Unlimited Sport | Rear | V | 6 Cyl 3.6L | 220 | 3604 |
Drive Shaft - Drive Shaft - Front Fabtech
Drive Shaft - Front
Steel
Drive Shaft; Front; Steel;
- Horsepower Rating: Oem
- Material: Steel
- Position: Front
- Usage: Oem
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Heavy Duty Replacement Driveshafts For Maximum
- Driveline Reliability
- Guarantee Superior Performance And Functionality
Vehicle | Submodel | Position | Block | Engine | CID | CC |
---|---|---|---|---|---|---|
2008 Jeep Wrangler | Front | V | 6 Cyl 3.8L | 231 | 3778 | |
2010 Jeep Wrangler | X | Front | V | 6 Cyl 3.8L | 231 | 3778 |
2011 Jeep Wrangler | Unlimited Rubicon | Front | V | 6 Cyl 3.8L | 231 | 3778 |
2011 Jeep Wrangler | 70th Anniversary | Front | V | 6 Cyl 3.8L | 231 | 3778 |
2011 Jeep Wrangler | Unlimited 70th Anniversary | Front | V | 6 Cyl 3.8L | 231 | 3778 |
2012 Jeep Wrangler | Sport | Front | V | 6 Cyl 3.6L | 220 | 3604 |
2012 Jeep Wrangler | Rubicon | Front | V | 6 Cyl 3.6L | 220 | 3604 |
2014 Jeep Wrangler | Unlimited Sport | Front | V | 6 Cyl 3.6L | 220 | 3604 |
2016 Jeep Wrangler | Unlimited Sahara | Front | V | 6 Cyl 3.6L | 220 | 3604 |
2016 Jeep Wrangler | Unlimited Sport | Front | V | 6 Cyl 3.6L | 220 | 3604 |
2016 Jeep Wrangler | Unlimited Sport S | Front | V | 6 Cyl 3.6L | 220 | 3604 |
Drive Shaft - Drive Shaft - Rear Fabtech
Drive Shaft - Rear
Heavy Duty
Drive Shaft; Rear; Heavy Duty;
- Horsepower Rating: Oem
- Material: Steel
- Position: Rear
- Usage: Oem
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Heavy Duty Replacement Driveshafts For Maximum
- Driveline Reliability
- Guarantee Superior Performance And Functionality
Vehicle | Submodel | Position | Block | Engine | CID | CC |
---|---|---|---|---|---|---|
2007 Jeep Wrangler | X | Rear | V | 6 Cyl 3.8L | 231 | 3778 |
2007 Jeep Wrangler | Sahara | Rear | V | 6 Cyl 3.8L | 231 | 3778 |
2008 Jeep Wrangler | X | Rear | V | 6 Cyl 3.8L | 231 | 3778 |
2008 Jeep Wrangler | Rubicon | Rear | V | 6 Cyl 3.8L | 231 | 3778 |
2009 Jeep Wrangler | X | Rear | V | 6 Cyl 3.8L | 231 | 3778 |
2009 Jeep Wrangler | X-S | Rear | V | 6 Cyl 3.8L | 231 | 3778 |
2010 Jeep Wrangler | Sport | Rear | V | 6 Cyl 3.8L | 231 | 3778 |
2010 Jeep Wrangler | X | Rear | V | 6 Cyl 3.8L | 231 | 3778 |
2011 Jeep Wrangler | Sahara | Rear | V | 6 Cyl 3.8L | 231 | 3778 |
2011 Jeep Wrangler | Rubicon | Rear | V | 6 Cyl 3.8L | 231 | 3778 |
2011 Jeep Wrangler | 70th Anniversary | Rear | V | 6 Cyl 3.8L | 231 | 3778 |
Front Driveshaft Assembly
From 12/05 702 mm
- Drive Shaft Length (In): 27.63 In
- Drive Shaft Wall Thickness (In): 0.083 In
- Grade Type: Regular
- Greaseable Drive Shaft: No
- Overall Length Adjustable: No
- Package Contents: 1 Driveshaft
- Shaft Diameter: 1.5
- Shaft Material: Steel
-
Features:
- Ready to install - this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
- All-new manufacturing - made 100% new, not remanufactured, so there's no core charge or return hassle
- Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience
- Simplifies repair - this replacement makes the U-joints serviceable for simpler maintenance
Vehicle | Transmission | Engine Designation | Position | Block | Engine | CID | CC |
---|---|---|---|---|---|---|---|
2006 BMW X3 | Automatic | Front | L | 6 Cyl 2.5L | 152 | 2494 | |
2006 BMW X3 | Automatic | M54 | Front | L | 6 Cyl 3.0L | - | 2979 |
Showing 1 – 10 products of 29 products